Need help?Do you have a question about the Airzone EASYZONE and is the answer not in the manual?
Instructions for installing the fresh air intake (CMV) unit, including component removal and preparation.
Step-by-step guide for mounting and connecting a thermostat, including wiring details.
Guidance on connecting the system to the indoor unit, referring to gateway technical data.
Instructions for connecting external power supply elements via the system bus.
Details on connecting the main control board and other elements to the power supply.
Steps for assembling the bypass damper, including pre-cut area removal and fixing.
Procedure for overriding a damper by disconnecting the actuator and inserting a sealing cap.
Overview of motorized plenums with pre-configured overrides and notes for 7-damper units.
Guide for configuring Airzone Lite thermostats, covering zone association and microswitch settings.
Procedure for adjusting maximum damper opening using the REG lever for optimal airflow.
Method for setting minimum damper opening with the A-M lever to ensure correct minimum airflow.
Instructions for accessing and configuring advanced settings for Airzone Blueface thermostats.
Steps to access and modify advanced settings for Airzone Think thermostats.
Configuration options for zone parameters, including thermostat settings, use mode, and control stages.
Instructions for installing the fresh air intake (CMV) unit, including component removal and preparation.
Step-by-step guide for mounting and connecting a thermostat, including wiring details.
Guidance on connecting the system to the indoor unit, referring to gateway technical data.
Instructions for connecting external power supply elements via the system bus.
Details on connecting the main control board and other elements to the power supply.
Steps for assembling the bypass damper, including pre-cut area removal and fixing.
Procedure for overriding a damper by disconnecting the actuator and inserting a sealing cap.
Overview of motorized plenums with pre-configured overrides and notes for 7-damper units.
Guide for configuring Airzone Lite thermostats, covering zone association and microswitch settings.
Procedure for adjusting maximum damper opening using the REG lever for optimal airflow.
Method for setting minimum damper opening with the A-M lever to ensure correct minimum airflow.
Instructions for accessing and configuring advanced settings for Airzone Blueface thermostats.
Steps to access and modify advanced settings for Airzone Think thermostats.
Configuration options for zone parameters, including thermostat settings, use mode, and control stages.
To Next Page
General
