12
EN
AIRZONE THINK
Check that the signal range
is optimal (minimum 30%).
Start the search for the
wireless channel.
Select the zone associated to
this thermostat. Each zone
has a corresponding control
output (actuator output or
radiant element control relay
output).
Wireless Think
Open the wireless
association channel. To do
so, click SW1. Once opened,
you have 15 minutes to
perform the association. You
can also open the wireless
association channel through
the Blueface thermostats.
Wired Think
Go to step 4.
IMPORTANT: Remember
not to have more than one
channel open in the same
installation at the same
time.
SW1
Languages:
• Spanish
• English
• French
• Italian
• Portuguese
• German
To Next Page
Loading...
