Need help?Do you have a question about the Aiwa AV-X120 and is the answer not in the manual?
General| Brand | Aiwa |
|---|---|
| Model | AV-X120 |
| Category | Stereo Receiver |
| Language | English |
Guidelines for proper unit placement and ventilation to prevent damage or hazards.
Instructions for safe power connection, plug usage, and cord handling.
Guidelines for cleaning the unit's cabinet to optimize performance.
Conditions requiring professional servicing and a warning against self-repair.
Verify unit voltage matches local supply before connecting AC cord.
Guide to connecting various audio/video devices using color-coded jacks.
Instructions for connecting front, center, and surround speakers to terminals.
How to set the impedance selector for front/center speakers.
Importance of connecting speakers with correct polarity for proper sound.
Guidance on positioning speakers for optimal Dolby Pro Logic or DSP effects.
How to connect FM and AM antennas to the unit.
Recommendation and method for connecting an outdoor antenna for better reception.
Inserting batteries, battery replacement, and general usage notes for the remote.
Steps to turn the AV-X120 receiver on and off.
How to select between speaker systems A, B, or both.
How to rename the AUX/TV and VIDEO 2 input labels.
Instructions for connecting and using headphones, including speaker muting.
Step-by-step guide to setting the unit's internal clock and display options.
How to adjust volume, left/right balance, and temporarily mute sound.
Explains the BBE system and how to adjust its levels for high-frequency clarity.
Explains the T-BASS system and how to adjust its levels for low-frequency enhancement.
Notes on how volume and tone adjustments affect recordings.
How to use the GEQ to select from five equalization modes for different music types.
How to select DSP surround modes to create environmental sound effects.
How to cancel modes and control GEQ/DSP via remote.
How to choose between different input sources for listening or watching.
Steps to record audio from selected sources to tape or MD.
How to listen to the source being recorded using the TAPE MONITOR function.
How to tune into FM and AM radio stations manually.
How to automatically scan and tune to the next available station.
How to switch to mono reception to reduce noise on FM stereo broadcasts.
How to directly tune to a station by entering its frequency.
How to store favorite radio stations for quick access.
How to tune directly to a stored preset radio station.
Instructions on how to delete a stored preset station.
Explanation of Dolby Pro Logic for home theater surround sound.
Checks required before using Dolby Pro Logic (speakers, connections).
How to choose the optimal Dolby Pro Logic mode based on speakers.
Table showing recommended modes for different speaker setups.
Using the test signal generator for speaker balance adjustment.
How to adjust the delay time for surround speakers.
How to fine-tune center and surround speaker volumes after initial balance.
How to set the unit to automatically turn off after a specified time.
Instructions for cleaning the unit's exterior safely.
Technical details for the FM and AM tuner sections.
Power output, distortion, and I/O details for the amplifier.
Power requirements, consumption, dimensions, and weight of the unit.
Trademark information for BBE and Dolby Pro Logic systems.
Solutions for common issues like no sound, static, or distorted tuner reception.
How to perform a factory reset to resolve malfunctions.
An alphabetical index of unit parts and their corresponding page numbers.
To Next Page
