To Next Page
С
СергейJul 5, 2026
В КАКИЕ РАЗЪЁМЫ ПОДКЛЮЧАТЬ КОЛОНКИ
В КАКИЕ РАЗЪЁМЫ ПОДКЛЮЧАТЬ КОЛОНКИ
Clears all data, including preset data, to initial conditions.
Changes AM channel step between 9 kHz and 10 kHz.
Moves optical pick-up to a position durable to vibration.
Disables taking a sample disc out of the tray in the shop.
Sets AMP IC parameters for tone quality and VACS level.
Procedures for adjusting the CD section's performance.
Checks the symmetry and peak-to-peak level of the S-curve waveform.
Confirms clear RF signal waveform and correct signal level.
Illustrates the functional blocks of the CD section.
Shows the block diagram for tuner, tape, and panel sections.
Details the block diagram for amplifier and power supply sections.
Schematic for the main board.
Schematic for the power board.
Schematic for the transformer board.
List of capacitors used in the device.
List of resistors used in the device.
List of semiconductors used in the device.
List of transistors used in the device.
List of diodes used in the device.
List of integrated circuits used in the device.
List of connectors used in the device.
General| Type | Stereo System |
|---|---|
| CD Player | Yes |
| Cassette Deck | Yes |
| Radio Tuner | Yes |
| Bluetooth | No |
| Remote Control | Yes |
| Functions | CD, Radio |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 80dB |
