Aiwa CX-NSZ35 User Manual

SERVICE MANUAL
DATA
• BASIC TAPE MECHANISM: ZZM-3 YPR1NF
• BASIC TAPE MECHANISM: AZG-1 YZD8RDM
CX-NSZ35 EZ
COMPACT DISC STEREO
CASSETTE RECEIVER
S/M Code No. 09-001-425-8T1
SIMPLE
• Replace this Service Manual with “Revision Publishing” when it is issued.

Aiwa CX-NSZ35 Specifications

General

Type	Stereo Receiver
Total Harmonic Distortion	0.7%
Input Sensitivity	250mV (line)
Dimensions	260 x 337 x 140mm
Weight	5.5kg
Tuner Bands	FM

Summary

Aiwa CX-NSZ35 EZ Service Manual Title Page

Schematic Diagram - Main Section 1/2

Tape Deck and Preamplifier Circuits

Schematics for tape transport, playback, record amplifiers, and bias oscillator.

Front Preamplifier and Input Circuits

Diagrams detailing front-end preamplification, microphone input, and auxiliary connections.

Schematic Diagram - Tuner Section 2/2

Tuner and RF/IF Stages

Schematics for radio tuner, RF amplification, and Intermediate Frequency (IF) stages.

Signal Processing and Control Circuits

Diagrams for tuner signal processing, PLL control, RDS data, and stereo decoding.

Schematic Diagram - Front Panel Circuits

Display and Control Interface

Schematics for the unit's display, buttons, and user interface elements.

Motor, Logic, and LED Driver Circuits

Circuit diagrams for motor control, main logic IC, and LED indicators.

Schematic Diagram - Power Supply and PT

Power Transformer and AC Input

Schematics related to the power transformer, AC cord, and primary power input.

Relay and Protection Circuits

Diagrams for the power relay and any associated protection or standby circuits.