Need help?Do you have a question about the Aiwa TS-W45 and is the answer not in the manual?
Controls the volume level of the subwoofer in relation to the stereo system.
Allows adjustment of sound quality or volume by changing the phase setting.
Enables automatic power on/off based on signal detection from the stereo system.
Details connecting via RCA phono jack or typical L and R speaker terminals.
Describes the acoustic bandpass filter design for enhanced bass reproduction.
Confirms the unit's voltage rating matches the local power supply before connecting.
Advises on positioning for adequate airflow, avoiding extreme conditions and obstructions.
Addresses potential magnetic picture distortion and mitigation steps.
Discusses and advises on resolving howling or buzzing sounds from nearby equipment.
Provides guidance on safe handling of power cords and unplugging when not in use.
Specifies using a soft, slightly moistened cloth with mild detergent for cleaning.
Recommends keeping magnetic items away to prevent data loss or noise.
Connects the subwoofer to an AIWA stereo via the RCA SUPER WOOFER/SUB WOOFER output jack.
Connects the subwoofer to a stereo system using its L and R speaker terminals.
Instructions for connecting the unit's AC power cord to a wall outlet.
Balances subwoofer volume with stereo speakers for optimal audio output.
Adjusts the phase switch to achieve the most natural sound based on room acoustics.
Explains automatic power activation/deactivation based on input signal presence.
Lists the types of input jacks available for connecting audio sources.
Specifies signal level and impedance requirements for proper input reception.
Identifies the terminals for connecting external speakers to the subwoofer.
Details RMS power output and distortion levels according to FTC rules.
Indicates the range of audio frequencies the subwoofer can reproduce.
Describes the speaker enclosure design as a bass reflex type.
Specifies the diameter of the internal speaker driver unit.
Defines the required AC voltage and frequency for operation.
States the maximum power the unit consumes during operation.
Provides the physical measurements (width, height, depth) of the subwoofer.
Lists the total weight of the subwoofer unit.
Details the cords and cables provided with the subwoofer package.
To Next Page
General
