Need help?Do you have a question about the Aiwa XP-R100 and is the answer not in the manual?
General| Type | Portable CD Player |
|---|---|
| Disc Capacity | 1 |
| Digital Output | No |
| Battery Type | 2 x AA batteries |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 90 dB |
| Power Requirements | 3V DC |
| Power Source | AC adapter, Batteries |
| Features | Repeat Play |
| Output | Headphones |
Control the HOLD switch to prevent accidental button presses during operation.
Instructions for turning the unit on, off, and entering standby mode.
Adjust volume and activate DSL for enhanced bass sound.
Steps for correctly placing a disc into the player.
Procedure for safely removing a disc from the player.
Controls for stopping, pausing, and searching tracks during playback.
Protects against skipping during shocks by buffering audio.
Resume playback from the last stopped point.
Plays tracks on the disc in a random sequence.
Options for repeating a single track or all tracks.
Control for audible button press confirmation sounds.
Procedure to stop the programmed playback sequence.
How to add more tracks to an existing program.
Steps to clear the programmed track list.
Reviewing the sequence of programmed tracks.
Manual tuning process for selecting AM or FM stations.
Fast method to tune to the next available station.
Tips for optimizing antenna performance for FM and AM.
How to receive FM stereo broadcasts and handle distortion.
Adjusting AM frequency steps for different regions.
Storing up to 30 AM/FM stations for quick access.
Recalling and playing preset radio stations.
Modifying existing stored radio station settings.
Removing single preset stations from memory.
Clearing all stored radio stations from memory.
Important considerations before and during external unit connection.
Procedure for cleaning the optical lens to ensure playback quality.
How to properly wipe discs before and after playing.
To Next Page
