Aiways U6 - Page 100

on the instrument lights up (gray). At the moment, press the "SET-" button of the steering wheel to
activate the intelligent speed limit assistance, the speed limit indicator lamp on the instrument lights
up, and the system sets the current speed to the maximum speed limit.
Within 5 seconds after the intelligent speed limit assistance is turned on, you can set the speed limit value
by pressing the "SET-" or "RES+" button on the steering wheel.
After short press on the "RES+" or "SET-" button, the target speed will increase or decrease step by step
in the speed unit of 5km/h each time. After long press on the "RES+" or "SET-" button, the target speed
will increase or decrease continuously in the speed unit of 1km/h each time. Release the button to
complete the maximum speed limit setting.
NOTE:
●
When the intelligent speed limit assistance is turned on for the first time, the instrument speed limit icon
displays the current speed by default.
●
The speed limit indicator lamp (gray) only lights up when the intelligent speed limit assistance is set to
"Alarm & Speed Limit". When "Alarm & Speed Limit" is not set, the on status of the intelligent speed limit
assistance can be confirmed through the speed limit icon
Check whether the intelligent speed
limit assistance is enabled.
●
After the intelligent speed limit assistance is turned on, if it is not set within 5 seconds, it will not be
possible to use "RES+" or "SET-" to adjust the speed limit. It is necessary to press the "LIM" button for
a long time before activating "RES+" or "SET-" again for setting.
●
If overtaking is needed, the driver can completely press the accelerator pedal. In this case, the
intelligent speed limit assistance will enter the override state, the speed control function will be
temporarily cancelled, and the speed of the vehicle will temporarily increase and exceed the maximum
speed limit. After the driver releases the accelerator pedal, the speed will slowly decrease below the
maximum speed limit. When the speed limit reminder function is override, the vehicle will always be in
a state of rapid acceleration. Please pay attention to the speed and drive carefully.
90 | AIWAYS