Camera and recognition systems
Panoramic image
The 360°AVM (Around View Monitoring) captures the surrounding environment of your vehicle through
the park assist camera (PAC), which is displayed on the central control screen.
Shifting to R or clicking the
button on the instrument control bar on the central control screen
activates the 360°AVM. Shifting out of R or clicking the “×” on the upper left corner of the 360°AVM
interface or clicking the
button on the instrument control bar on the central control screen again de-
activates the 360°AVM.
Also, you can press the "*" custom button on the steering wheel to activate the 360° AVM. Press the
button again to de-activate the 360° AVM. Before using it, you need to set the custom button to the AVM.
PATH: System Settings - Controls of Steering Wheel
NOTE: When the speed is greater than 30km/h, the 360° panoramic image will automatically quit working.
Setting the AVM function
Click the
button on the upper right corner of the AVM interface to pop up the setting interface, or
you can set the AVM display through the Vehicle Settings -Intelligent Parking Assist interface.
The settable display includes:
●
Transparent blind spot: Display of the AVM model chassis becomes transparent.
●
Turn signal lights activates AVM: Turn on the left/right turn signal lights to activate the AVM and display
the field of view on the corresponding side.
●
Activation of obstacles: The AVM activates automatically when obstacles are sensed around your
vehicle.
PATH: Vehicle Settings - AI Parking - Panoramic Display
AIWAYS | 143
To Next Page
Loading...
