Lane Departure Warning (LDW)
The lane departure warning function identifies the front lane line through the front-view camera when the
vehicle speed is in the range of 60-150km/h. When the system detects that the vehicle has a tendency to
deviate from the current lane, it will remind the driver to control the vehicle in the lane through visual and
auditory alarms to avoid accidents.
You can turn off lane departure assist and set lane departure assist sensitivity through the central control
screen. When lane departure assist is turned off, the lane departure warning function is turned off.
PATH: Vehicle Settings - Advanced Drive Assistance Service - Lane Departure Assist
CAUTION: Please set the LDW function when the vehicle is stationary to ensure a safe environment.
The LDW function has limitations or cannot work in some driving scenarios, including but not limited to:
●
The front-view camera is blocked and unable to recognize the lane line or the lane line is too thin,
damaged, or blurred, which lead to incorrect recognition;
●
The vehicle is driving on a road that is too wide, too narrow or with sharp turns;
●
The vehicle has just entered a section with lane lines or a section without lane lines;
●
The driver actively activates the turn signal lamps or hazard warning lamps;
124 | AIWAYS
To Next Page
Loading...
