You can turn off lane departure assist and set lane departure assist sensitivity through the central control
screen. When lane departure assist is turned off, the lane keeping assist function is turned off.
NOTE: Lane keeping assist has no separate switch. When the lane departure assist switch is set to "Alarm
& Automatic Correction", lane keeping assist is enabled.
PATH: Vehicle Settings - Advanced Drive Assistance Service - Lane Departure Assist
CAUTION:
●
The LKA function is a driver assistance function, which can remind and appropriately intervene in the
lane departure behavior. Even if the LKA function is equipped, the driver must still concentrate, hold the
steering wheel, drive carefully, and always observe the road conditions to avoid accidents.
●
Please set the LKA function in an environment where the vehicle is stationary and safety is ensured.
●
The LKA function may have errors in the recognition of lane lines, mistakenly identifying poor
pavements, some road structures or objects as lane lines. When the vehicle is driving abnormally for this
reason, please take over the vehicle immediately, brake and decelerate and keep the vehicle running
steadily. It is recommended to turn off this function when vehicles pass through poor road sections or
road construction sites.
●
Severe weather conditions such as rain, snow, smoke, hail, sand, and backlight will affect the stability
of the LKA function. It is not recommended to use the LKA function in severe weather.
126 | AIWAYS
To Next Page
Loading...
