NOTE: Not all recognizable traffic signs are listed in the figure above.
You can set the prompt mode of "Speed Limit Assist" (Alarm, Alarm & Speed Limit) and turn on Speed Limit
Exceeded Warning through the central control screen.
PATH: Vehicle Settings - Advanced Drive Assistance Service - Speed Limit Assist
CAUTION:
●
Severe weather conditions such as rain, snow, smoke, hail, sand, and backlight will affect the stability
of the TSR function, and it is not recommended to use the TSR function in severe weather.
●
Intense driving, fast turning, lane changing and other behaviors of drivers will affect the stability of the
TSR function, resulting in system misrecognition, false alarms, and false removals.
The traffic signs recognized by the TSR function include: fixed value speed limit signs, variable value speed
limit signs, permanent speed limit signs, and temporary speed limit signs; traffic signs that do not meet
the requirements include but are not limited to: non-standard graphics, damage signs, blocked signs,
signs marked on the ground, text part of signs (such as visibility, rain and snow weather and etc.).
The system can't distinguish the accurate direction for the signs with no clear direction to the object at the
display position, and the signs with no clear direction at the display position include but are not limited to:
130 | AIWAYS
To Next Page
Loading...
