You can turn on the BSD through the central control screen. If the BSD is turned on, the RCTA activates.
PATH: Vehicle Settings - Advanced Drive Assistance Service - Blind Spot Detection
CAUTION:
●
The RCTA function is a driving assistance function, which cannot replace direct visual observation. Even
if equipped with the RCTA function, the driver should still take the initiative to observe the road
conditions when reversing to avoid accidents. The driver should not only rely on the RCTA function to
remind himself/herself that there are crossing vehicles at the back. Many external factors will reduce the
performance of RCTA function.
●
When the surrounding environment is noisy, such as too noisy outside the car, the alarm may not be
heard.
●
The RCTA function cannot respond to the target in the blind spot of the sensor, and the RCTA function
cannot detect the following vehicle through obstacles or parked vehicle.
Working conditions of RCTA:
●
Shifted to R (Reverse);
●
Target vehicle crossing behind your vehicle at 30km/h and below;
●
Expected collision time less than 3 seconds.
140 | AIWAYS
To Next Page
Loading...
