When you arrive at your destination, shift to P and activate the EPB. Close all the doors, compartment
cover and tailgate and leave the vehicle with the key. Then, the vehicle will be powered off automatically
(set in the OFF mode).
You can also click the "Vehicle Power off" button on the Quick Control interface of the central control
screen to power off (OFF mode) manually.
In addition, you can turn on the Automatic Power-off function through the central control screen to
prevent the battery from running down due to the key left in the vehicle when you leave the vehicle. If the
Automatic Power-off function is enabled, the "OFF" mode activates automatically when certain conditions
are met.
PATH: Vehicle Settings - Driveing Settings
The power mode of the Automatic Power-off function is switched from "ON" to "OFF" if the following
conditions are met:
●
The Automatic Power-off function has been enabled
●
The vehicle is not set in the OTA (Over-the-Air) state
●
All the doors are closed but the key is left in the vehicle
●
The vehicle is stationary and shifted to P
AIWAYS | 151
To Next Page
Loading...
