●
lease use the charging equipment that complies with the new national standard to charge the vehicle,
otherwise it may result in failure to charge, and damage to the vehicle or charging equipment in serious
cases, resulting in personal injury.
●
Under any circumstances and under any conditions, it is strictly forbidden to touch the exposed metal
part of the charging port by hand.
Charging operation
You can use the dedicated AC charging pile for home use and the public AC charging pile for normal
charging of your car; use the public DC charging pile for quick charging of your car:
1.
When the vehicle is shifted to P, click the icon
of the door control interface or AVM control
interface in the instrument display area of the central control screen，or click the icon
of the
instrument display area of the central control screen to pop up the battery manager interface, and then
click the "Open Charging Port" button on the battery manager interface to open the charging port
cover;
2. Check whether the charging connector and charging equipment are in good condition. Align the
charging connector and connect it to the vehicle charging port. If the charging connector is connected
well, the indicator light
(indicating the charging cable is connected) on the instrument panel
comes on;
3. Start charging according to the indication of the charging equipment. Then, the indicator light of the
charging port flashes in white;
4. After the charging is completed, end the charging on the charging equipment. After the vehicle is
unlocked, press the charging connector release button and then pull out the charging connector. If the
charging is stopped midway, please end the charging on the central control screen or charging
equipment and unlock the charging connector, and then pull out the charging connector;
5. If the charging fails, try to charge your vehicle on another charging pile. If the charging still fails, please
contact your authorized repair shop immediately;
AIWAYS | 159
To Next Page
Loading...
