NOTE: After charging starts, the meter will display the remaining charging time.
Type2,ICCB Charging
The onboard charging device is placed above the trunk floor and is a Type 2 AC charging cable.
CAUTION:
1. This product contains high voltage circuit, non-professional workers do not remove or modified without
authorization.
2. This product use the butt end of the socket for 32A 220V AC, docking vehicle terminal and power supply
socket, respectively, should be meet with SAE J1772-2010 standard, good performance.Otherwise may
cause safety accidents.
3. Please distinguish between the client and vehicles to the power supply plug, prevent mistaken
insertion, mistake will lead to can't charging and charging plug socket damage.
4. It is forbidden for minors to use the charging equipment and keep them away from the charging
equipment when charging operation.
5. When used and stored should prevent liquid and dust, metal scrap into the charger inside, watch the
drop and the impact, so as to avoid product damage.
6. Suitable for using the environment temperature to -30℃, 50℃, no corrosion gas such as acid and alkali
in the surrounding environment so as not to affect the product performance.Try to avoid directly used
in the rain or high humidity environment.And should try to prevent casing damage.
7. Shock, pulling, stretching, roller compaction, excessive bending can cause performance degradation
products, please pay attention to storageand use.
Features
●
Charging plug meet 62196-2 IEC 2010 SHEET 2-IIb and SAE J1772-2010 standards.
●
Product assembly meet IEC61851-12010 charging mode 3 connection method.
●
Excellent protection performance, protection grade IP55 when in operation.
●
Attractive appearance, hand-held ergonomic design, easy-to-use plug.
AIWAYS | 161
To Next Page
