●
Charging plug complies with 62196-2 IEC 2010 SHEET 2-lle standard
●
Power plug complies with DIN VED 0620-1 standard
●
Control box complies with IEC 61851-1 2010 standard
●
Excellent protection performance, protection grade IP55 – working condition
Environmental performance
●
Operating temperature: -30℃ to 50℃
Precautions for use
1. Connection charging: when charging, it is necessary to connect the plug and socket. When there is a
clear clicking sound it is locked in place.
2. Note: pull out the charging plug parallel with the interface. Do not jiggle the plug when pulling out the
charging socket.
3. Use the triangle hook of the control box. After charging, please hang the cable on the attached hook
to stop the charging wire from being damaged.
4. To avoid an electric shock, don’t touch the metal conductor when working with high voltage.
5. The shell of the product is made of thermoplastic. To avoid affecting use, do not subject the shell to
impacts or external force.
6. To charge, first connect the small plug at the tail and then plug in the charging plug. After charging, first
detach the charging plug at the tail.
Function Description
Insert the ICCB connector into a household socket. If the red and green Indicators are on, indicating that
the charging cable is connected.Insert the other end of the charge gun into the slow charging port of the
vehicle, the instrument display "charge gun connected", then the blue charging indicator blinks , indicating
that the vehicle is charging.
AIWAYS | 163
To Next Page
Loading...
