●
If tyre wear is uneven, it is recommended to check the dynamic balance of the tyre. To reduce tyre wear
and prolong the service life of tyres, you can maintain the tyres according to your driving habits and
road conditions.
●
The breaking-in period of the new tyre is at the first 500km. It should be run in with appropriate speed
and prudent driving method, which can extend the service life of tyres. After changing the tyre, the tyre
must be checked for dynamic balance.
●
When driving by the road edge or similar road section, the vehicle can move at slow speed and in such
a manner that the vehicle wheel is at right angle to the road edge as far as possible. Fast driving in
corners, excessive acceleration and emergency braking will increase tyre wear. If the vehicle cannot
keep straight driving or deviates during driving, please check the wheel alignment parameters and
adjust them if necessary.
Four-wheel Alignment
If you drive under bad road conditions for a long time, the normal performance of wheels may be affected.
If necessary, you need to adjust the four-wheel alignment of your car to ensure stable driving and light
steering, and reduce the abnormal wear of tyres and steering mechanism at the same time.
Wiper blade
Wiper blade
1. Before replacing the wiper blade, switch the gear to parking (P), enable electronic parking (EPB), and
power down the vehicle after confirming that the wiper is off. Open "Wiper Service Mode" through the
central control screen, and the wiper blade automatically moves to the maintenance position;
PATH: Vehicle Settings - Servicing and Safety - Wiper Service Mode
2. Lift the wiper arm away from the front windshield;
AIWAYS | 181
To Next Page
Loading...
