EasyManua.ls Logo

Aiways U6 - Page 50

Aiways U6
212 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
U: Suitable for child seats that are universally approved in this weight group;
Universal and semi-universal child seats are classified into ISOFIX size class A to G. This information is
available for child seats using the ISOFIX fixture system.
WARNING:
When in the vehicle, a child must be restrained using a child restraint system suitable for his/her age,
weight and height.
It is strictly forbidden to install a rear-facing child safety seat in the front passenger seat if the front
passenger airbag is active, there will be life-threatening risks! When you have to put a child on the front
passenger seat, the front passenger airbag has to be deactivated.
You should follow the information and warnings listed in the chapter Children Safety in Vehicles as well
as the instruction manual from the seat manufacturer at all times.
According the instruction of seat maunfacturer to fixing child safety seats, The 3-point seatbelt must be
securely locked to keep the seat in place.The locked seatbelt can make sure the child safety seat is
securely fixated to the car.
CAUTION:
When installing the child seat on a rear seat position,if there is contact between the child safety seat,the
child’s legs and the back of the front seat,it is advised to move the front seat forward to remove any
contact.
When installing a child seat with a back on a rear seat position,it is advised to remove the headrest.
When the seat position is occupied by a child bosster seat without a back,or by an adult,the headrest
must be installed.
In the process of installing the pull-up belt, you can dismantle the headrest if necessary, and remove the
cover to make sure that the belt can be used smoothly.
Recommended child safety seats
We recommend the child safety seats:
40 | AIWAYS

Related product manuals