1.Wiper lever 2.Wiper sensitivity adjustment switch
Move the wiper lever up and down to adjust the wiper mode, pull the wiper lever inward and hold it, and
the front windshield washing function can be turned on.
：Move the wiper lever downward to this position, and the front wiper will move once.
：Move the wiper lever to this position to turn off the wiper.
：Move the wiper lever to this position to enable the automatic wiper function.
：Move the wiper lever to this position, and the wiper will move at a lower speed.
：Move the wiper lever to this position, and the wiper will move at a higher speed.
Automatic wiper function ：After the automatic wiper function is enabled, the rain and light sensor will
work. The rain and light sensor will automatically turn on/off and adjust the wiper speed according to the
rainfall intensity. Move the wiper sensitivity adjustment switch upward to improve the sensitivity in the
AIWAYS | 51
To Next Page
Loading...
