Press the window locking switch to lock the front passenger side window and the rear window. At this
time, the front passenger side window or the rear window switch cannot be used to control the window
lifting. Press the window lock switch again to unlock, and the window switch function on the
corresponding side will be restored.
Window initialization
hen the one-click lifting and anti-pinch functions have failed, you can initialize the windows to restore the
function. Manually press the window lifting switch to fully open the window and keep it pressed for more
than 1 second, then pull up the window lifting switch until the window is closed and keep it pulled for more
than 1 second, and the window will complete initialization.
he following conditions may cause the one-click lifting and anti-pinch functions to fail:
●
Power is cut off during window lifting.
●
he window is lifted and lowered for many times without reaching the mechanical top dead center.
●
The window lifting stroke exceeds the preset top dead center or bottom dead center.
NOTE:
●
Operate the keys during the automatic opening or closing of the window to stay the window in the
current position.
●
All the four windows of the vehicle have anti-pinch function. If foreign objects block the windows in
automatic window lifting, the windows will stop closing and lower for a certain distance.
WARNING:
●
When closing a window, make sure no child or any other passenger has his/her head or hands close to
the window. The window has an anti-pinch function, but accidental injuries may occur if no care is taken
or the window is out of control. When a child is on your car, please close the window and open the child
lock to prevent him/her from opening the window to cause accidents.
●
If the power windows are operated repeatedly and continuously in a short period of time, it may trigger
the thermal protection of the system, have the electric opening and closing function disabled and let the
56 | AIWAYS
To Next Page
