The Carplay application does not need to be installed, as it is built into the IOS system. Before use, you
need to enter the "Settings - General -Carplay on-board" path to enable the Carplay function. (When
connecting, select "USB only" connection without "Open Bluetooth").
he mobile phone and IVI can be connected according to the following operations:
1. Click the Carplay function icon on the IVI screen to enter the main interface of Carplay mapping;
2. Click the menu bar at the lower left corner of the main interface to return to the main menu interface,
and map the phone, music, map, information, calendar, settings and other IOS system built-in
applications. At the same time, it supports the extension of third-party maps and music applications
that have been adapted, such as Amap and QQ Music (video applications are not supported
temporarily);
3. Open the APP, connect the bluetooth according to the pop-up prompt, and the mobile phone screen can
be mapped to the IVI screen. At the same time, the navigation can use the bluetooth channel to play
the navigation sound using the IVI audio;
NOTE:
●
After the Carplay is successfully connected, the Bluetooth switch of the IVI will be turned off by default.
If the Bluetooth switch is turned on, Carplay will automatically exit.
●
To run Carplay, you need to obtain relevant permissions, such as "Turn on USB Debug Mode".
●
It is recommended to use the original data cable when purchasing mobile phones to connect the IVI and
mobile phone.
Andriod Auto
Android Auto is a mobile phone and IVI interconnection application launched by Google. Android Auto can
perform the basic functions of Android smartphones, and use third-party applications through the IVI.
Connect the mobile phone and IVI through the front Type-C port, and authorize it on the mobile phone.
After successful connection, you can use the Android Auto function.
NOTE:
●
The operation of Android Auto requires the smartphone system version to be Android 5. 0 or higher.
70 | AIWAYS
To Next Page
Loading...
