Temperature adjustment: Short-press the arrows above and below the number to increase or decrease
the temperature by 0. 5°C; Long-press and hold to continuously adjust the temperature.
Air volume adjustment: It can be adjusted between gears 1-7. Click the gear bar from left to right to
increase the air volume, and vice versa.
Internal and external circulation adjustment: Click to switch between internal and external circulation.
Driver seat heating (if equipped): The driver seat is equipped with seat heating function. Press the driver
seat heating button to switch between gear 1, gear 2 and AUTO.
Front passenger seat heating (if equipped): The front passenger seat is equipped with seat heating
function. Press the front passenger seat heating button to switch between gear 1, gear 2 and AUTO.
Automatic air conditioning: Click the “AUTO” icon to enable the mode of automatic air conditioning. In this
mode, your car will automatically adjust the air-conditioning temperature, air volume, wind direction and
internal/external circulation mode at the driver and front passenger's sides according to the temperature
you set. Click the “AUTO” button again to exit from the mode of automatic air conditioning. Your car will
keep the current air-conditioning status.
SYNC: Click to enable the temperature synchronous adjustment function of the driver seat and front
passenger seat. After the temperature synchronous adjustment function is enabled, the temperature at
the front passenger side will be adjusted synchronously when adjusting the air conditioning temperature
at the driver side.
Air-conditioning compressor switch: Click the “AC” icon to enable the air-conditioning compressor and you
can use its refrigeration function. Click again to turn off the air-conditioning compressor and disable the
refrigeration function; at this moment, it will keep the air vent direction unchanged and output natural air.
Air flow direction
AIWAYS | 73
To Next Page
Loading...
