Wear of brake discs: when the front brake discs are worn, a rubbing noise occurs. This audible warning informs you
that the discs must be replaced immediately. Risk of damaging the braking system.
ABS braking system
Your vehicle may be fitted with an ABS braking system which allows you to retain control of your vehicle regardless of road
adhesion conditions.
A second integrated function called EBD manages the front/rear distribution of braking power.
When ABS is activated, a vibration can be felt on the brake pedal. This vibration is perfectly normal and is due to the system's
operation.
This braking system does not avail you of complying with the highway code, in particular
safety distances.
Two LEDs on the dashboard indicate the condition of your braking system.
Red general defect indicator: this lights up when the ignition is switched on and turns off automatically if there are
no defects.
ABS LED: this lights up when the ignition is switched on and switches off a few seconds later to inform you that the
system is operational.
If this LED comes on while driving, call in at your nearest AIXAM distributor; the
ABS function is not working and there is a risk of the wheels locking up. However, the EBD is working.
General defect LED and ABS LED: these two indicators come on in the event of a severe malfunction (0) of
your braking system. The ABS and EBD functions are not working.
Stop your vehicle as soon as possible and call the nearest distributor
To Next Page
Loading...
Need help?
General
