ANTI-THEFT device* via perimeter alarm
The criteria for triggering the alarm are:
Driver door open
Passenger door open
Ignition on
(Attention: this alarm does not provide protection against
the tailgate being opened)
1. Press the unlock button on the
remote control (two quick flashes)
2. The doors unlock
Emergency disarming (e.g. vehicle closed and
alarm armed but remote control battery out of
order) :
1. Unlock the driver's lock using the key
2. Door opens
3. The audible and light warnings are
triggered
4. Once the door is open, turn on the
ignition and press centralised
locking situated on the dashboard
until the signals stop.
*depending on version
1. Doors closed
2. Press the lock button on the remote
control
3. Doors lock (long flash)
4. Press again the lock button on the
remote control
5. The alarm is armed (two very quick
flashes)
To Next Page
Loading...
