- Place the jack under the car, making sure that it is
positioned on the outer side rail and not under the
flooring.
- Lift the vehicle by turning the handle so that the wheel is
above ground level.
- Remove the wheel nuts and remove the wheel.
- Fasten the temporary spare wheel by following the
procedure in reverse (tightening torque: 50 N.m +/-10).
Lock the nuts after having lowered the vehicle.
- Put the damaged wheel in the compartment and attach it
correctly.
- Go to the nearest repair shop quickly, have the
damaged wheel repaired and check the tyre pressure.
The spare wheel may be a different dimension to the
vehicle's other wheels. You must comply with the
speed indicated on the label.
Replace the tyres as soon as the wear indicators are
reached.
PRESSURE AND INFLATION OF TYRES (BAR)
All models except Crossline and
Crossover with wing extension
Only Crossline and Crossover with
wing extension
The pressure in your tyres has a direct effect on your
safety and on your vehicle's consumption.
It must be checked regularly (once a week) and must be
adjusted, if necessary, before each journey.
Each front and rear axle must be fitted with identical tyres,
i.e. the same brand, the same type, the same structure,
the same dimensions, the same load index and the same
speed index.
The standardised dimensions for your Aixam are indicated
on the tyre pressure label glued to the door frame. The
load index must be greater than "60". The speed index
must be greater than "J".
It is essential to regularly check the condition of your
tyres.
There are "wear indicators" within the grooves of the tyre,
perpendicular to the tyre tread.
To Next Page
Loading...
