REPLACING A FRONT FOG LIGHT BULB
2. On the casing (brake/rear/indicators):
Remove the casing inside the
vehicle.
Remove the bulb fitting by
pivoting it to the left. The bulb
is an integral part of the
support
Reposition the bulb fitting,
taking care that the attachment
pins correspond to those at the
rear of the headlight and pivot
to the right.
- Unscrew the two screws
- Remove and change the bulb
1. Rear light and brake light bulb
2. Indicator light bulb
REPLACING A REAR LIGHT BULB
1. On the tailgate (rear fog light and reversing
light):
Remove the light by
unscrewing the two screws.
Replace the bulb
REPLACING THE INTERIOR LIGHT
Unclip the interior
light from the ceiling
to replace the unit.
To Next Page
Loading...
