REPLACING A FOG LIGHT BULB
- Remove the bulb’s support by making it pivot to
the left. The bulb is an integral part of the
support.
- Place the bulb’s support back taking care that
the attachment pins correspond to those at the
rear of the headlight and make it pivot to the
right.
REPLACEMENT OF A REAR LIGHT BULB
- Open the tailgate
- Move aside the lining
of the back quarter light
- Unblock the connector
- Remove it and
change the bulb
1. Rear light and stop
light bulb
2. Bulb of flickering
light
3. Reverse drive light
4. Rear fog light bulb
REPLACING THE BULB OF INTERIOR
LIGHTING
Unclip the dome light’s
interior lighting to
replace the bulb.
43
To Next Page
Loading...
