AJAX FireProtect - Settings; Configuring Detector Settings

Temperature Threshold Exceeded
The state of temperature threshold exceeded
alarm
Rapid Temperature Rise
The state of rapid temperature increase alarm
High CO Level (
FireProtect Plus only
)
The state of dangerous CO level alarm
Backup Battery Charge
Backup battery level of the device
Smoke sensor
The state of the smoke detector
Smoke Sensor Dust Level
The dust level in the smoke chamber
Temporary Deactivation
Shows the status of the device: active, completely
disabled by the user, or only noti�cations about
triggering of the device tamper button are
disabled
Firmware
Detector �rmware version
Device ID
Device identi�er
Settings
Setting
Value
First �eld
Device name, can be edited
Room
Selecting the virtual room to which the device is
assigned
Dangerous CO Level Alarm (
FireProtect Plus only
)
If active, the detector alerts of exceeding the
limits of carbon monoxide concentration
High Temperature Alarm
If active, the detector reacts when the
1.
Devices
2.
FireProtect |
FireProtect Plus
3.
Settings