一、Backlight Adjustable: 22 Lighting Effects
FN+INSERT: Lighting switch,including 4 lighting effects
FN+DELETE: Lighting switch,including 4 lighting effects
FN+HOME: Lighting switch,including 4 lighting effects
FN+PGUP: Lighting switch,including 4 lighting effects
FN+PGDN: Lighting switch,including4 lighting effects
FN+SCROLL: Lighting switch,including 2 lighting effects
FN+UP: Brightness++,all indicators flash 3 times when adjusted to the limit gear
FN+DOWN: Brightness--all indicators flash 3 times when adjusted to the limit gear
FN+LEFT: Light effect direction adjustment(Direction to the left)
FN+RIGHT: Light effect direction adjustment(Direction to the right)
FN+-_: Light speed-, the backlight flashes 3 times at the limit
FN+=+:Light speed+,the backlight flashes 3 times at the limit
二、The FN+END Key Combination Turns On The Backlight Recording Mode:
1. Press FN+4~5(2 sets of custom lights,1~3 have 3 sets of backlight);
2. Press FN+END to enter the light recording mode(The indicator light flashes);
3. Enter the lighting recording content that the user needs;
4. After recording,press FN+END to save the content.
5.Clear Light Recording:Reset to clear the light recording.
To Next Page
Need help?
General
