Akai AC-410

3-2-6. Replacement of the PB HEAD OR REC/PB HEAD
1) Remove the two® screws and remove the HEAD SHIELD
PLATE.
(A) SCREW HEAD
SHIELD PLATE
CONNECTOR
Fig. 3-19
2) Disconnect the connector on the CONNECTOR PCB and
remove the PCB retaining screw.
REC/PB HEAD
(OR PB HEAD)
ee
CONNECTOR
PCB
Fig. 3-20
3) Remove the two head retaining screws and remove the
HEAD BLOCK.
4)
Reassemble
in
the
reverse
order.
After
replacement,
de-
magnetize
the
HEAD
then
perform
head
azimuth
adjustment.
15