Akai AC-410

I. DISASSEMBLY
1-1. REMOVE OF MAIN COVER
1) Remove the seven screws on back and
six screws on both sides.
2) Remove the MAIN COVER
Fig. 1-1
1-2. REMOVE OF CD MECHA & FRONT PANEL
1) Remove the CD door
2) Remove the four screws (A) on both sides and
disconnect three connectors and the flat cable
from the TC-DK P.C.B.
Remove the CD player block
3
~~
4) Remove the three screws (B) and two screws (C)
on both sides.
5) Remove the FRONT PANEL
Fig. 1-2
CHASS!S BACK
N
WMD MMM
X\
4 WOM) WMG
PANEL ~FRONT
CD PLAYER BLOCK
SCREW (A)
PANEL FRONT