Akai Advance 61

22
Setup Mode
Setup Mode shows a list of available presets that let you use
Advance 61 to control your DAW. We’ve pre-mapped each so
you can use Advance 61 to control your DAW in the most
logical and intuitive way possible.
To navigate this mode:
• Use the Cursors to move between different fields and tabs.
You can change some global settings in this mode (MIDI
channel (MIDI Ch), octave (Oct), and transposition (Trans)),
as well.
• Use the Data Dial to change a value or setting.
See the following sections to learn more about using Setup Mode.
Loading and Saving DAW Presets
Setup Mode will show a list of presets that let you use Advance 61 to control your DAW. We’ve pre-mapped
each so you can use Advance 61 to control your DAW in the most logical and intuitive way possible.
To load a DAW preset:
1. Use the Cursor Buttons to select the DAW Preset Browser (the list of DAW presets in the right half of
the display).
2. Turn the Data Dial to scroll through the list.
3. Press the Data Dial to load a DAW preset. The loaded preset will be highlighted.