36
Available Control Parameters
Below is a list of available parameters for each type of control.
Encoders
Type
This determines whether the encoder sends a MIDI CC message or an
increment/decrement message (Inc/Dec).
CC#
When Type is set to MIDI CC, this is the MIDI CC number that the encoder controls.
The available range is 0–127.
MIDI Channel
This is the MIDI channel over which the encoder will send its MIDI message when you
turn it. You can select the Common Channel (Common:##) or any one of Channels
1–16 or B1–16.
Min / Max
When Type is set to MIDI CC, these determine the lowest (Min) and highest (Max)
values. The available range is 0–127.
Invert
When Type is set to MIDI CC, this determines whether the encoder’s polarity is
normal (Off) or inverted (On).
To Next Page
Loading...
