39
Footswitch
Type
This is the type of message that the footswitch will send when you press it. The
footswitch can send a Sustain message, send a MIDI CC message, or act as a
switch for Tap Tempo, Play, Record, Stop, Play/Stop, or Arp On/Off.
Mode When Type is set to Sustain or MIDI CC, this determines whether the footswitch’s
operation is Toggle or Momentary:
• Toggle: Each time you press the footswitch, it will turn on or off and remain
in that state until you press it again.
• Momentary: The footswitch will be on for as long as you are holding it down.
It will turn off when you release it.
MIDI Channel When Type is set to Sustain or MIDI CC, this is the MIDI channel over which the
footswitch will send its MIDI note when you press it. You can select the Common
Channel (Common:##) or any one of Channels A1–16 or B1–16.
Expression Pedal
MIDI Channel
This is the MIDI channel over which the expression pedal will send its MIDI message
when you turn it. You can select the Common Channel (Common:##) or any one of
Channels A1–16 or B1–16.
CC#
When Type is set to MIDI CC, this is the MIDI CC number that the expression pedal
controls. The available range is 0–127.
Min / Max
When Type is set to MIDI CC, these determine the lowest (Min) and highest (Max)
values. The available range is 0–127.
Invert
When Type is set to MIDI CC, this determines whether the expression pedal’s polarity
is normal (Off) or inverted (On).
To Next Page
Loading...
