The appliance has the following audio inputs:
● Stereo audio: Connect a suitable cable to the R/L channels of the LINE
INPUT connection.
Audio connections (output)
These connections allow you to send audio signal to a connected amplier.
The appliance has the following audio outputs:
● Stereo audio: Connect a suitable cable to the R/L channels of the AUDIO
OUT connection.
● Coaxial digital audio: Insert a suitable cable into the COAXIAL DIGITAL
AUDIO connection.
Video connections
The video connections allow you to send to video signal (still images or
movies) to a connected TV.
The appliance has the following video outputs (in order of preference):
● Component: Connect a suitable cable to the Pr/Y/Pb channels of the
COMPONENT VIDEO OUT connection.
● SCART: Insert a suitable cable into the SCART connection.
● Composite video: Insert a suitable cable into the VIDEO OUT connection.
i
Do not make all connections simultaneously as this will affect the
output quality.
Aerial connection (FM radio)
● Insert an FM aerial or a suitable cable into the FM connection.
Aerial connection (AM radio)
● Place the aerial on a horizontal at surface. Place the aerial close enough
to the appliance to be able to connect the wires.
● To connect the aerial to the appliance:
- Press the latches to open the terminals. Keep the latches depressed.
- Connect the wire ends to the appliance.
- Release the latches to lock the wire ends.
To Next Page
Loading...
