Picture format
In the TV DISPLAY section, press the arrow buttons (11) to select 4:3 4:3 PANSCAN or 4:3
LETTERBOX for a conventional TV set. Select WIDE SQUEEZE for a wide screen TV set.
In the ANGLE MARK section, press the arrow buttons to switch this function ON or OFF. When
switched ON, the appliance shows the angle mark when multi-camera angles are available.
OSD LANG
In the OSD LANG section, press the arrow buttons to choose the language.
In the CLOSED CAPTIONS section, press the arrow buttons to switch this function ON or OFF. When
switched ON, the appliance shows hidden text when it is available.
Screensaver on/off.
The screensaver will be turned on automatically when there is no picture.
last memory: on/off
When the DVD is paused, playback will automatically resume from where last stopped.
Audio setup page
Speaker settings
DOWNMIX: Select LT/RT to mix 5.1-channel audio into left channel and right channel. Select
STEREO to mix 5.1 channel audio into signal stereo.
DIGITAL OUTPUT
Select SPDIF RAW to set the digital audio signal output to its raw format (DTS/Dolby Digital 5.1).
Select SPDIF OFF to switch off the digital audio signal output.
LPCM OUTPUT
LPCM OUT: When PCM ONLY is set, the LPCM OUT function provides a sample rating for the analog
audio input (48 kHz or 96 kHz).
High Definition Compatible Digital (HDCD)
Select the value (2x, 1x or OFF) for full sound richness of HDCD-encoded CDs.
Karaoke setup
MIC: To switch the connected microphone on or off.
MIC VOL: To adjust the volume level of the microphone.
ECHO LEVEL: To adjust the echo level of the microphone.
To Next Page
Loading...
Need help?
General
