Dolby digital audio setup
DUAL MONO
STEREO: for stereo effect.
R-Mono: right channel only.
L-Mono: left channel only.
Mix-Mono: the average of both the left and right channel.
This function is only available for Dolby AC-3 encoded 2-channel discs.
DYNAMIC
Select the value for the dynamic range compression to avoid losing sound details resulting from a low
volume.
Video setup page
RESOLUTION: select the desired resolution.
OFF: Select this format when the Composite video output is used.
YUV: Set the video output in analog component video format.
P_YUV: Select this format when the Component output is used and to send the video output in
progressive signals.
RGB: Set the video output in RGB format when SCART output is used.
SHARPNESS: Adjust the screen sharpness.
BRIGHTNESS: Adjust the screen brightness.
CONTRAST: Adjust the contrast of the image.
HUE: Adjust the colour intensity.
SATURATION: Adjust the saturation of the image.
GAMMA: Adjust the colour intensity.
Preference setup page
Select the video output format to match the appliance to the TV system: PAL, AUTO or NTSC.
The video output format can only be selected when the DVD tray is empty.
Please note: if the wrong option has been selected, this may result in very poor image quality. In that
case, select a different setting.
PBC (Playback Control)
Press the PBC button (5) to switch on the playback function.
Language setup page
In the SUBTITLE section, choose the subtitle language.
In the AUDIO section, choose the audio language.
In the DISC MENU section, choose the language for the disc menu.
To Next Page
Loading...
Need help?
General
