7.Cleaning and maintenance
WARNING Before performing any cleaning or maintenance, switch off and unplug the
appliance.
Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen
the cloth slightly with water and a neutral solution.
7.1. Handle and care of a disc
Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do
not touch the disc surface.
Do not bend or press the disc. Do not expose the disc to direct sunlight or heating
sources.
Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently,
radially, from centre towards the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning
fluids will permanently damage the disc surface.
To Next Page
Loading...
Need help?
General
