Remote Control Battery Installation
Power Source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation
on AC. Insert the AC cord plug into a standard
110-240V 50/60HZ polarized AC outlet.
NOTE:
1.This TV can be connected to the specified voltage
(AC 110-240V, 50/60HZ).
2.If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut the
blade. It is the users responsibility to have an
electrician replace the obsolete outlet.
'
4.If you cause a static discharge when touching the
unit, and the unit fails to function, simply unplug
the unit from the AC outlet, wait a few minutes, and
plug it back in. The unit should return to normal
operation.
Requires two AAA batteries(supplied).
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the
cover and sliding it off in the direction indicated.
2. Install batteries matching(+) and(-) polarity signs.
3. Replace the battery cover by sliding in reverse until
the lock snaps.
Note: Incorrect installation can cause battery leakage
and corrosion that will damage the Remote
control.
Precautions
Replace batteries in pair.
Do not mix battery types(zinc carbon with
alkaline).
Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
6
Installation
To Next Page
Loading...
