EDIT SAMPLE
CD3000XL OperatorÕs Manual Page 155
PLAY TO SAMPLE END is useful for triggering sampled drums either
from a keyboard or sequencer or by drum trigger units such as the
ME35T and the like. Like the previous setting, no loops are played,
but an instantaneous trigger signal or key press will play the whole of
the sample (the key does not have to be held down for the whole
length of the sample).
This allows you set a pitch shift of up to ±50 cents (one semitone) for a
HOLD loop. This function is useful when you have a small, short,
single cycle loop that has latched onto some strange, discordant
aspect of the sound and is slightly out of tune with the rest of it.
To Next Page
Loading...
