3
PITCH MODULATION
DATA ENTRY
DOWN
UP
MIDI / SELECT
OCTAVE
1 2
3
4
5
6
7
90
8
REVERB
DEPTH
CC
NOTE
AFTER
TOUCH
VELOCITY VOLUME
ASSIGNMENT DATA ENTRY
TRANSPOSE
RESET
CC
DATA
CC
NO.
MIDI
CHANNEL
PROGRAM
CANCEL ENTER
NUMERIC KEYPAD
BOX CONTENTS
• EIE Pro • USB cable
• Software/Driver CD • Quickstart Guide
• Power adapter • Safety Instructions & Warranty Information Booklet
SYSTEM REQUIREMENTS
Minimum PC Requirements:
• Pentium III 450 MHz Processor
• 128 MB RAM
• Available USB 2.0 Port
• Windows XP (with Service Pack 2 installed)
Minimum Macintosh Requirements:
• Any Apple computer with native USB support
• 128 MB RAM
• Available USB 2.0 Port
• Mac OS X "Jaguar" version 10.2 or later
DRIVER INSTALLATION
IMPORTANT!: Before connecting EIE Pro to your computer, install the drivers:
1. Check for driver updates online at www.akaipro.com/eiepro. If there are no updates available, insert
the included driver CD.
2. Follow the onscreen instructions to install the drivers. (You will be asked to connect EIE Pro to your
computer during the installation process.)
CONNECTION DIAGRAM
• WARNING: Only put on your headphones or turn on your speakers AFTER turning on the EIE Pro.
• When recording a guitar or bass with an active pickup, set the EIE Pro's GUITAR / MIC/LINE
SWITCH to "MIC/LINE." If your instrument uses a passive pickup, set the switch to "GUITAR."
• To reduce electrical hum at high gain settings, keep the EIE Pro's power supply away from your
To Next Page
Need help?
General
