SAVE
CD3000XL OperatorÕs Manual Page 213
If, for some reason, there is a problem with the hard disk (i.e. it is not connected or not switched
on or, if it’s a removable medium of some sort and the disk/cartridge is not inserted or write
protected), you will receive the message:
You will also receive this message if you try to save to a CD-ROM which, of course, is a read-
only medium.
NOTE: You will also receive this message when you select under the same
circumstances.
Setting SCSI ID’s, etc., is discussed later in this section.
To Next Page
Loading...
