GLOBAL
Page 260 CD3000XL OperatorÕs Manual
When a recording is being made, the screen shows the incoming waveform as it is being
recorded. I.e:
You may stop recording by pressing F8 at any time.
If you are going to record digitally, when you enter the DD RECORD page, the screen will
show:
or whatever sample rate is being received.
If no digital connection has been made or has become disconnected, the display will tell you:
Please check your digital connections.
When recording digitally, the bottom line of the display shows:
and the screen draws the incoming waveform envelope as it is being recorded.
Once a recording has been made, you may use the ENT/PLAY key to play it back.
To Next Page
Loading...
