47
SPECIFICATIONS
EWI4000s
Type Wind-instrument type controller with sound module
Fingerings EWI, saxophone, flute, oboe, EVI, and EVI reversed
Sensors Note Keys: touch sensors
Mouthpiece: air pressure level sensor
Lip: pressure level sensor
Bend Up/Down Plates: touch sensors
Glide Plate: touch sensor
Octave Shift Rollers: touch sensors
Program Key: touch sensor
Keys LEVEL, FX, SETUP, TRANSPOSE, OCT, HOLD
Sensor Adjustment Breath Sense, Breath Adjustment, Bend Width, Bend Adjustment,
Glide Time, Glide Adjustment, Vibrato Adjustment
Terminals 1 line out (1/4”)
1 headphone out (dual mono/stereo mini jack)
(Recommended min. headphone impedance: 32Ω)
1 MIDI in (5-pin DIN)
1 MIDI out (5-pin DIN)
1 DC in (for optional AC adaptor MP-9II)
Other Removal cable clutch
Power Requirement 4 AA batteries (alkaline or rechargeable)
(Approx. 8 hrs. continuous use by batteries except with headphones)
9VDC/200mA AC-adaptor MP-9II (optional)
Dimensions 670.5mm (L) x 61mm (W) x 69mm (D)
Weight 874g (without batteries)
Accessories Neck strap, 4 AA batteries, cleaning cloth, mouthpiece cover,
Operator's Manual
SOUND MODULE
Sound type Analog modeling synthesizer
Voices 2 (only with Octave & Hold function)
Control Range 8 octaves
Sound Source 2 Oscillators, 2 Filters
Waveforms: Saw Tooth, Triangle, Pulse
Noise Generator, Formant filter
Effect Reverb, Delay, Chorus
Sound Capacity 100 (50 preset sounds x 2)
Display 2 7-segment LEDs
Function Transpose, Tune, Note Hold, Octave, Program Change, Key Delay
Other Sound Editor software for EWI4000s is available from our Web site
(http://www.akaipro.com
)
All specifications are subject to change without notice.
8-22-768X-D
To Next Page
Loading...
