Do you have a question about the Akai EWI5000 and is the answer not in the manual?
Type | Electronic Wind Instrument |
---|---|
Connectivity | USB, Wireless |
Battery | Rechargeable Lithium-Ion |
Presets | 100 |
Controls | Octave Rollers |
Inputs | USB |
Wireless | 2.4 GHz |
Fingering Modes | EWI, Saxophone, Flute, Oboe |
Outputs | 1/4" Audio Out, 1/8" Headphone Out |
Details the EWI5000's design, wireless connectivity, and sound library.
Provides information on system requirements, compatibility, and product registration.
Crucial points before operating, including mouthpiece care and sensor contact.
Instructions on powering, charging, battery life, and proper holding technique.
Guides on connecting for wireless audio, external amplification, and headphones.
Explains how to play notes, use octave rollers, pitch-bend, and glide plates.
Explains how to adjust the EWI5000's sound using parameter knobs and their functions.
Details how to customize sensor response like note delay and breath sensitivity.
Guides on calibrating various sensors for optimal performance and sensitivity.
Sets the MIDI channel for sending messages and as the synth's input channel.
Configures the Hold Button for different modes like Legato Hold or Non-Legato Hold.
Sets the Interval Button for harmony notes or program selection.
Methods for choosing programs using the Program Button, Hold/Interval buttons, or note keys.
How to assign specific programs to note keys for quick selection.
Steps to save current settings as a new User Program.
Adjusts the spatial effect, including wet/dry mix, damping, width, and room size.
Modulates pitch and delay for a multi-voice effect, adjusting rate and depth.
Creates echo effects by adjusting time and feedback parameters.
Visual guides for note key configurations across different fingering modes.
Overview of menus and submenus accessible in Setup Mode for device configuration.