Need help?Do you have a question about the Akai GX-265D and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Signal to Noise Ratio | 58dB |
| Output | Line |
| Type | Reel to Reel Tape Deck |
| Tape Speed | 7.5 ips / 3.75 ips |
| Heads | 3 (1 x record, 1 x playback, 1 x erase) |
| Reel Size | 7-inch |
| Wow and Flutter | 0.08% (7 1⁄2 ips) |
| Input | Line, microphone |
| Total Harmonic Distortion | 1% |
| Semiconductors | Transistors and diodes |
Defines the tape track configuration.
Specifies operational tape speeds.
Details wow and flutter performance metrics.
Outlines frequency response characteristics.
Lists harmonic distortion levels.
Specifies signal-to-noise ratio performance.
Describes audio output specifications.
Details input signal characteristics.
Specifies record/playback level settings.
Defines crosstalk performance.
Specifies erase ratio performance.
Lists bias frequency.
Details bias leak specifications.
Outlines high-frequency deviation.
Details motor types and revolutions.
Visual guide for unit disassembly and reassembly.
Identifies major components in top and bottom views.
Covers pinch wheel and capstan positioning and pressure.
Details adjustments for various microswitches and plates.
Covers brake solenoid, tension, and pause lever adjustments.
Adjustments for reverse solenoid, D switch lever, and reverse joint.
Adjustments for head switch, capstan shaft, and tension microswitch.
Adjustments for tape guide height and reel table height.
Details adjustment points for head alignment and height.
Table and notes for head adjustment procedures.
Adjustments for power supply voltage and tape speed.
Adjustments for recording and playback amplifier levels.
Detailed chart for amplifier adjustments.
Lists DC resistance for various coils.
Table correlating P.C. board titles and numbers.
Diagrams showing P.C. board component layouts.
To Next Page
