Need help?Do you have a question about the Akai GX-747 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Signal to Noise Ratio | 65dB |
| Type | Reel-to-Reel |
| Motor | 2 x reel drive, 1 x capstan |
| Input Sensitivity | 70mV |
| Dimensions | 440 x 474 x 272mm |
| Reel Size | 10.5 inch reel |
| Inputs | RCA |
| Outputs | XLR, RCA |
| Wow and Flutter | 0.03% (19 cm/s) |
Describes the properties and performance characteristics of EE tape.
Explains amplifier block diagrams and detailed circuit operation principles.
Adjusts the loose play gap of the guide roller for proper tape travel.
Adjusts the position of the micro switch (A) relative to the arm cam.
Adjusts the position of the micro switch (B) against the stopper.
Adjusts the height of the reel table for centered tape take-up.
Adjusts the capstan shaft for optimal loose play.
Adjusts brake band position and applies specified brake tension.
Sets the gap between pinch roller clamp and lever joints.
Sets the gap between capstan and pinch roller in pause mode.
Sets the pinch roller pressure to a specified force.
Calibrates tape speed to 7-1/2 ips and 3-3/4 ips.
Adjusts the clock frequency using IFT components.
Adjusts photo transistor sensitivity for balanced pulse widths.
Lists the titles and part numbers of various P.C. boards.
Illustrates the component layout and connections of P.C. boards.
To Next Page
