Need help?Do you have a question about the Akai GX-400D and is the answer not in the manual?
General| Type | Reel-to-reel tape deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Heads | 3 (Erase, Record, Playback) |
| Reel Size | 7 inch, 10.5 inch |
| Tape Speeds | 3.75 & 7.5 ips |
| Input | Line level |
| Output | Line level |
| Inputs | Microphone, Line |
| Outputs | Line, Headphones |
Step-by-step guide for loading magnetic tape onto the reel tables.
Explains stereo recording and playback using two tracks on the tape.
Details monaural recording and playback sequence and operation.
Covers automatic and manual tape direction reversal for recording/playback.
Explains the use of the Tape Selector Switch for optimal tape response.
Details tape speed options and estimated recording times.
Describes the system for speedy mode selection without Stop Button.
Explains the Cue Switch for precision cueing and editing tape.
Details the automatic stop and automatic shut-off functions of the unit.
Explains the Pause Switch for momentarily stopping tape during operation.
Covers remote control capabilities using the optional Akai RC-17 unit.
How to create a reverberation effect during recording.
Guide to transferring material and layering multiple recordings.
Details various sound mixing combinations for recording.
Instructions for erasing previously recorded signals from tape.
Techniques for splicing and editing magnetic tape for best results.
Recommendations for cleaning the GX heads to maintain performance.
Guide to cleaning pinch wheels and capstans for proper tape transport.
Procedure for demagnetizing heads to prevent noise and drop-out.
Instructions for adjusting voltage settings for different power sources.
How to set the cycle conversion switch for correct tape speed.
To Next Page
