Akai GX-M10

IX.
MECHANISM
ADJUSTMENT
MOTOR LEAF SWITCH
TAKE UP
REEL TABLE GEAR
t
i
TAN GEAR
INSTALLATION SCREW
MOTOR
MIDDLE GEAR
FLYWHEEL
1. MOTOR LEAF SWITCH TIMING
- ADJUSTMENT (Refer to Fig..17)
The FF key has been depressed and when the capstan
gear turns before points A and B gears are engaged,
they screech because the middle gear which was
engaged springs off. Adjust the timing of the motor
revolutions to prevent this.
Gently depress the FF key and adjust the installation
position of the motor leaf switch until the motor’s
switch is activated after the points A and B gears
have been engaged slightly.
2. MUTE LEAF SWITCH INSTALLATION
POSITION ADJUSTMENT (Refer to Fig. 18)
When in the playback mode, the space A should be
0.5 to 1.0mm as in Fig. 18. To adjust, turn the leaf
switch installation screw.
Confirm the switch stays in the same position when
the FF and PLAY or RWD and PLAY keys are
depressed together.
re